Honeywell HRXD16, User Manual

Page: 72 / 156

Configuration
72
Figure 3-50 Schedule Setup Screen
You can program the DVR to record only during certain times based on time of
day, day of the week, and holidays. The smallest time segment you can use is 15
minutes.
2. Highlighting Schedule On and pressing toggles between On and Off . In the
Schedule On mode, the DVR records video based on the schedule(s) established
in the Schedule screen. When turning Schedule recording Off, you will be asked
to confirm your decision, and
displays at the top-left corner of each camera
screen. Panic recording will function even when Schedule is turned off.
displays during panic recording.
3. Highlight the + and press to add a schedule item.
4. Highlight the box under the Day heading and press to change the days that
the scheduled recording will take place. Choose from: Sun , Mon , Tue , Wed , Thu ,
Fri , Sat , M~F , Hol and All .
5. Highlight the box under the Range heading and press to change the time
range that the scheduled recording will take place. The smallest time segment
you can use is 15 minutes.
6. Highlight the box under the Mode heading and press to change the recording
mode that will be used. Choose from: No Record , Time , Event and Time &
Event .
When the DVR is in No Record mode, it will not record during the preset day and
time range as long as the PANIC button is not pressed. Use the No Record mode
when you do NOT want the DVR to record during certain times.
When the DVR is in Time mode, the icon displays at the top-left corner of the
screen. The DVR will record and displays the icon at the top-left corner of the
screen during the scheduled times.
When the DVR is in Event mode, the red icon displays at the top-left corner of
the screen. The DVR will record and displays the icon at the top-left corner of
the screen when any event occurs. When the DVR is in Pre-Event recording
mode, the yellow icon displays when there is no event, and the DVR is not
recording. When the DVR is in Pre-Event mode, the red and display when
any event occurs and the DVR starts recording.
When the DVR is in Time & Event mode, the DVR will follow the Time settings and
the icon displays. The DVR follows the Event settings and the icon
displays.