Honeywell HRXD16, User Manual

Page: 52 / 156

Configuration
52
Figure 3-24 Network Setup Screen
2. Highlight the first box beside Transfer Speed . Press the Up and Down arrow
buttons to set the Transfer Speed from 50 Kbps to 100 Mbps.
3. Highlight the second box beside Transfer Speed . You can select the unit of
measure for the transfer speed between: bps and ips . Press to set the
transfer speed.
4. Highlight the box beside Quality and press . You can select the Quality from:
Very High , High , Standard and Low . Press to set the Quality.
Note The higher Quality settings require higher Transfer Speed
settings. The transfer speed you set is the maximum speed.
Depending on the network environment, this speed may not be
achieved.
Note The local recording speed might be affected by various network
bandwidth (Transfer Speed) conditions.
LAN Setup Screen
1. Highlight the LAN tab, and the LAN screen ( Figure 3-25 ) displays.