Honeywell HRXD16 User Manual Download Page 122

Page: 122 / 156

USB Hard Disk Drive Preparation

122

After formatting is complete, the USB-IDE hard disk drive will be added to

Computer

Connect the USB-IDE hard disk drive to the DVR.

Preparing the USB-IDE Hard Disk Drive in Windows 98

Note

Preparing a USB-IDE hard disk drive under Windows ME is
almost identical to Windows 98.

Connect the USB-IDE hard disk drive to your computer using the USB Cable.

Turn on your computer. The

Add New Hardware wizard

window will appear.

Install the device driver for the USB backup device following the instructions
provided with your USB hard disk drive.

If the USB-IDE hard disk drive is partitioned or contains data, it will show up in

Computer

as a hard disk drive icon. Check the file system in

Properties >

General > File System

. If the file system is NOT FAT32 format, format the

USB-IDE hard disk drive with FAT32 format.

Run the FDISK utility by clicking

Start

then

RUN

. Type

fdisk

and click

When the MS-DOS command prompt appears, type

and hit the enter key.

In the FDISK Option menu, choose

5. Change current fixed disk drive

Choose the appropriate letter corresponding to the USB-IDE hard disk drive.

In the FDISK Option menu, choose

1. Create DOS partition or Logical DOS

Drive

10. In the Create DOS Partition or Logical DOS Drive menu, choose

1. Create

Primary DOS Partition

. Type

to use all available space and press the enter key.

Press

ESC

to exit the screen after the USB-IDE hard disk drive partition is created.

11. Restart your computer and verify the newly created drive is in

My Computer

12. Right-click the newly created hard disk drive icon and select

Format

13. In the Format Screen, select

Full

as the

Format type

and click

Start

14. After formatting is complete, connect the USB-IDE hard disk drive to the DVR.

Summary of Contents for HRXD16





























































































































































Search results

Summary of Contents for HRXD16

Reviews:

Related manuals for HRXD16

Brands by name

Popular brands

Honeywell HRXD16, User Manual

Search results

Summary of Contents for HRXD16

Reviews:

Related manuals for HRXD16

Brands by name

Popular brands