Chapter 7, Protocol Settings
129
Haemonetics
®
Cell Saver
®
Elite
®
User Manual
P/N 120745-IE, Manual revision: AA
the procedure and touch
Cycle Wash Volume
to adjust the wash
volume manually.
Single:
The device transitions to the Wash phase using the normal wash
volume.
Double:
The device transitions to the Wash phase and automatically
doubles the wash volume.
Pump Regulation
(On/Off)
Determines if the effluent line sensor is used to regulate the pump speed.
Because pump regulation is used to reduce the pump speed if the effluent line
sensor detects RBCs leaving the bowl, turning pump regulation off may cause
cells to be lost into the waste bag.
Empty Destination
(Blue/Red)
Determines where fluid is directed when the device automatically enters the
Empty phase. It also determines how volume accounting is handled for the
Return phase.
Blue:
If the device automatically enters the Empty phase the RBCs are
returned through the blue line to the RBC Bag; the status indicator
displays “Empty.”
If you touch
Return
, the RBCs are emptied through the red line, and the
processed volume decreases as blood is returned to the reservoir.
Red:
If the device automatically enters the Empty phase, the RBCs are
returned through the red line; the status indicator displays “Return.” If the
red line is selected, an additional volume accounting parameter is
displayed to determine how the device accounts for the fluid returned
through the red line.
If you touch
Return
, the volume accounting is handled according to the
volume accounting parameter.
Note: If you touch
Empty
, the RBCs are always returned to the blue line.
Volume Accounting
(Reservoir/Circuit)
Only available if the Empty Destination is set to “Red.”
Reservoir:
The processed volume decreases as the blood is returned
to the reservoir for reprocessing.
Circuit:
The reinfusion volume increases as the blood is returned
directly to the patient via the extracorporeal circuit.
Final Cycle
(On/Off)
Determines the
End Procedure
behavior when air is detected during Fill.
On:
The final cycle options (Concentrate, Wash, End Procedure) are
available.
