Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 71 / 142

Basic GigaVUE H Series Connections and Configuration 71
Chapter 4
Basic GigaVUE H Series Connections and
Configuration
This chapter describes how to establish your first configuration session with
the GigaVUE-HC3 and set the basic initial configuration options necessary to
get the node up and running.
Refer to the following sections for details:
• Grounding the GigaVUE-HC3 Chassis on page 72
• Connecting Power to the GigaVUE-HC3 on page 73
• Fan Tray Procedures on page 76
• Removing the Extension Board on page 81
• Removing the Control Card on page 83
• Inserting the Control Card on page 85
• Connecting Serial Console and Mgmt Ports on page 87
• Configuring Basic GigaVUE H Series Settings on page 87
•
Access the Command-Line Interface over the Console Port on
page 87
• Run the Jump-Start Script on page 89
• Configure Modules and Enable Ports on page 91
• Command-Line Basics on page 92
• The Basic Commands on page 97
• Completing the Initial GigaVUE H Series Setup on page 101