Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 80 / 142

80 GigaVUE-HC3 Hardware Installation Guide
Inserting a Fan Tray
You can insert the entire fan tray using the following procedure.
To insert a fan tray:
1.
Remove all fan modules from the fan tray. Refer to the procedure for Removing a
Fan Module on page 77 .
2.
Place the empty fan tray into the slot and slide it in. Refer to Figure 4-12 on
page 80 .
Figure 4-12: Fan Tray Insertion
3.
Slide the fan tray in until it is flush with the chassis rear and will not slide in any
further as shown in
Figure 4-13 on page 80 .
Figure 4-13: Fan Tray Inserted