Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 36 / 142

36 GigaVUE-HC3 Hardware Installation Guide
In the CLI, the inline network ports are referred to as c1 to c4. Table 1-4 on page 36
lists the port mapping.
For example, if the box ID is 1 and the BPS-HC3-C25F2G module is in slot 3, Table 1-5
on page 36 lists the default inline networks:
N
OTE
:
Default inline networks cannot be deleted.
BPS Forwarding LED
Each BPS-HC3-C25F2G inline network port has two LEDs, an upper and a lower, that
represent the inline network forwarding state. The upper LED indicates tool flow. The
lower LED indicates network flow. Refer to
Figure 1-10 on page 36 .
Figure 1-10: BPS Forwarding LEDs, Upper and Lower
Table 1-6 on page 36 lists the inline network forwarding states and the color of the
upper and lower LEDs for each state.
Table 1-4: Port Mapping
Port CLI Port
A1 c1
B1 c2
A2 c3
B2 c4
Table 1-5: Default Inline Networks
Default Inline Network Network A
Connected To Network B
Connected To
default_inline_net_1_3_1 1/3/c1 1/3/c2
default_inline_net_1_3_2 1/3/c3 1/3/c4
Table 1-6: Inline Network Forwarding States and LED Descriptions
Physical
Bypass Traffic Path Forwarding State of Inline
Network Upper LED Lower LED
enable bypass, drop,
monitoring, or
to-inline-tool PHYSICAL BYPASS OFF GREEN
disable bypass FORCED BYPASS OFF GREEN