Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 40 / 142

40 GigaVUE-HC3 Hardware Installation Guide
Figure 1-12: BPS-HC3-Q35C2G Module
BPS-HC3-Q35C2G and BPS-HC3-C35C2G Notes and Rules
Keep in mind the following notes and rules when using the BPS-HC3-C35C2G and
BPS-HC3-Q35C2G modules:
Status LEDs
For module LED states, refer to
Module Status LEDs on page 43.
H/S Hot Swap
Button and
LED 10Gb/25Gb Ports
BPS-HC3-Q35C2G provides sixteen 10Gb/
25Gb ports, each labeled with an X prefix.
The ports are designated X1 to X16. The
10Gb ports support SFP+/SFP28 SR/LR
optical transceivers. The 25Gb ports
support SFP+/SFP28 SR/LR optical
transceivers.
For port LED states, refer to Port Status
LEDs on page 43.
Inline Network Ports
BPS-HC3-Q35C2G provides two 40Gb LR4
inline network port pairs.
BPS-HC3-Q35C2G and BPS-HC3-C35C2G Notes
Transceivers
For details about the supported transceiver, cable type, and connectivity specifications, refer
to
“GigaVUE-OS Compatibility and Interoperability Matrix” .
Maximum BPS-HC3-Q35C2G
and BPS-HC3-C35C2G
Modules Per Chassis
The maximum number of BPS-HC3-Q35C2G and BPS-HC3-C35C2G modules per chassis
is four. Each module can support up to two 40Gb or 100Gb inline network port pairs
respectively, and sixteen 10Gb ports per module for a total of sixty-four.
Network, Tool, Hybrid, or
Stack Ports
The sixteen 10Gb ports on the BPS-HC3-Q35C2G and BPS-HC3-C35C2G modules can be
used as a network, tool, hybrid, or stack ports.
10Gb Inline Ports
The sixteen 10Gb ports can be configured as inline network or inline tool ports, supporting
logical bypass on 10Gb ports.
10Gb and 25Gb Ports
Every group of four ports (quad) can be configured as 25Gb. In one quad, there cannot be a
mix of 10Gb and 25Gb ports. By default, all sixteen ports are configured as 10Gb ports. To
configure 25Gb, you must configure the port speed as follows:
(config) # port x1..x4 params admin enable
(config) # port x1..x4 params speed 25000
100Gb or 40Gb Inline
Network Ports
By default, the inline network ports are 40Gb and 100Gb on BPS-HC3-Q35C2G and
BPS-HC3-C35C2G modules respectively. Speed change is not allowed on inline network
ports.