Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 34 / 142

34 GigaVUE-HC3 Hardware Installation Guide
Starting in software version 5.4, SFP28 transceivers support 25Gb.
N
OTE
:
To support 25Gb functionality, the GigaVUE-HC3 node must be equipped with
Control Card version 2 (CCv2).
For loss summary specifications, refer to Loss Summary Specifications on page 116 .
For details about the supported transceiver, cable type, fanout, inline ports, and
clusters, refer to
“GigaVUE-OS Compatibility and Interoperability Matrix” .
Features of 100Gb Bypass Combo Module
The 100Gb bypass combo module has the following features:
• Two inline network port pairs that pass traffic bi-directionally.
• Port pairs that offer optical protection switch for physical bypass.
• Sixteen regular 10Gb/25Gb ports that operate with SFP+/SFP28 transceivers.
• A mode to select either bypass or inline.
• A module that is hot swappable. Refer to procedures in Removing GigaVUE-HC3
Modules on page 68 .
Figure 1-9: BPS-HC3-C25F2G Module
BPS-HC3-C25F2G Notes and Rules
Keep in mind the following notes and rules when using the BPS-HC3-C25F2G module:
Status LEDs
For module LED states, refer to
Module Status LEDs on page 43.
H/S Hot Swap
Button and
LED 10Gb/25Gb Ports
BPS-HC3-C25F2G provides sixteen 10Gb
ports, each labeled with an X prefix. The
ports are designated X1 to X16. The 10Gb/
25Gb ports support SFP+/SFP28 SR/LR
optical transceivers.
For port LED states, refer to Port Status
LEDs on page 43.
Inline Network Ports
BPS-HC3-C25F2G provides two 100Gb/
40Gb SR4 inline network port pairs.
Or, you can configure a 4x10G port
breakout mode that lets a 40Gb/100Gb SR4
port operate as four 10Gb ports.
Refer to Port Modes for BPS-HC3-C25F2G
on page 37.
BPS-HC3-C25F2G Notes
Transceivers
For details about the supported transceiver, cable type, and connectivity specifications, refer
to
“GigaVUE-OS Compatibility and Interoperability Matrix” .