Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 30 / 142

30 GigaVUE-HC3 Hardware Installation Guide
There are rules for configuring parent ports and subports. For more information, refer
to the
port command in the reference section of the GigaVUE-OS CLI User’s Guide .
Once the port breakout mode has been configured, refer to Breakout Panels on
page 44 .
SMT-HC3-C05 Module
The SMT-HC3-C05 module is a GigaVUE-HC3 module blending GigaSMART
intelligence and port capabilities into a single module. GigaSMART licenses enable a
variety of capabilities.
GigaVUE-HC3 nodes with a GigaSMART module installed can take advantage of
GigaSMART’s advanced processing features, including slicing, masking, source port
features, de-duplication, header stripping, advanced tunneling, FlowVUE, Adaptive
Packet Filtering (APF), Application Session Filtering (ASF), NetFlow generation, SSL
decryption for out-of-band tools, GTP filtering and correlation. Refer to the
GigaVUE-OS CLI User’s Guide for more information on the GigaSMART features.
The SMT-HC3-C05 module can be used standalone, or combined with other
GigaSMART modules in a cluster. Because each GigaSMART module has its own
compute engine, additional modules may be added as more compute power is
required. The processing is not limited to the ports on the module. GigaSMART
functionality is available to all ports within a clustered environment.
In addition to GigaSMART capabilities and two GigaSMART engine ports, the
SMT-HC3-C05 module also has five 100Gb/40Gb ports.
The 100Gb ports with QSFP28 transceiver on the SMT-HC3-C05 module can be
broken out into four times 25Gb ports, called
4x25G mode.
N
OTE
:
To support 25Gb functionality, the GigaVUE-HC3 node must be equipped with
Control Card version 2 (CCv2).
For details about the supported transceiver, cable type, fanout, inline ports, and
clusters, refer to
“GigaVUE-OS Compatibility and Interoperability Matrix” .