Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 69 / 142

Assembling the GigaVUE-HC3 Node 69
8.
Apply licenses with the following CLI command:
license install box id <box-id> key <license-key>
Backing Up Running Configuration
Use the information in this section to back up the running configuration.
Use the following command to back up to a SCP/TFTP/HTTP server:
(config) # configuration text generate active running upload <upload URL> <filename>
This command uses FTP, TFTP, or SCP to upload the running configuration to a text file
on remote storage. The format for the
<upload URL>
is as follows:
[protocol]://username[:password]@hostname/path/filename
For example, the following command uploads a text configuration file based on the
active running configuration and uploads it to an FTP server at 192.168.1.49 with the
name
config.txt :
(config) # configuration text generate active running upload ftp://myuser:mypass@192.168.1.49/ftp/config.txt
Module Removal and Replacement Procedure (Hot Removal)
Modules can be removed from the node with the power on.
I
MPORTANT
:
Hot removal of modules without following the listed steps can cause
system instability and require a reboot.
Before starting, make sure you are wearing an ESD-preventive wrist or ankle strap.
Replacing a Module with the Same Type of Module
1.
Shut down the module to prepare for removal with the following CLI command:
(config) # card slot <slot ID> down
2.
Slide the module out of the chassis and store it in a static-safe location.
3.
Insert the new module of the same type.
Replacing a Module with a Different Type of Module
1.
Remove all packet distribution configuration related to the module using the
following CLI command:
(config) # no card slot <slot ID>
2.
Slide the module out of chassis and store it in a static-safe location.
3.
Insert the new module of the different type.
4.
Issue the following CLI command to make the card available for configuration:
(config) # card slot <slot ID>
Next Steps
Refer to Configuring Basic GigaVUE H Series Settings on page 87 for information on
getting connected with the GigaVUE-OS to make your initial configuration settings.