Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 39 / 142

Introducing the GigaVUE-HC3 39
Before installing the BPS-HC3-Q35C2G and BPS-HC3-C35C2G modules, the
GigaVUE-HC3 must be running software version 5.5.00 or higher.
The BPS-HC3-Q35C2G and BPS-HC3-C35C2G modules do not support 1Gb.
The sixteen 10Gb ports in the BPS-HC3-Q35C2G and BPS-HC3-Q35C2G modules
can be used as network, tool, hybrid, stack, inline-network, or inline-tool ports.
SFP28 transceivers support 25Gb on both the modules.
N
OTE
:
To support 25Gb functionality, the GigaVUE-HC3 node must be equipped with
Control Card version 2 (CCv2).
For loss summary specifications, refer to Loss Summary Specifications on page 116 .
For details about the supported transceiver, cable type, fanout, inline ports, and
clusters, refer to
“GigaVUE-OS Compatibility and Interoperability Matrix” .
F
Figure 1-11: BPS-HC3-C35C2G Module
Status LEDs
For module LED states, refer to
Module Status LEDs on page 43.
H/S Hot Swap
Button and
LED 10Gb/25Gb Ports
BPS-HC3-C35C2G provides sixteen 10Gb/
25Gb ports, each labeled with an X prefix.
The ports are designated X1 to X16. The
10Gb ports support SFP+/SFP28 SR/LR/T
optical transceivers. The 25Gb ports
support SFP+/SFP28 SR/LR optical
transceivers.
For port LED states, refer to Port Status
LEDs on page 43.
Inline Network Ports
BPS-HC3-C35C2G provides two 100Gb LR4
inline network port pairs.