Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 72 / 142

72 GigaVUE-HC3 Hardware Installation Guide
Grounding the GigaVUE-HC3 Chassis
1.
Locate the grounding lug at the center rear of the chassis. Refer to Figure 4-1 on
page 72 (or Figure 1-3 on page 11 ) for the location on a GigaVUE-HC3 node.
Figure 4-1: Grounding Lug on Rear of GigaVUE-HC3
2.
Insert the grounding wire into the lug The specifications for the ground wire is as
follows:
Standard Wire 12-16 (AWG)
3.
Tighten the grounding lug screw to secure the grounding wire.
The GigaVUE-HC3 chassis has a grounding lug
located at the center rear of the chassis. Connect
grounding wire to the grounding lug on the chassis
using the following procedure.