Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 88 / 142

88 GigaVUE-HC3 Hardware Installation Guide
•
Parity – None
•
Stop bits – 1
•
Flow control – None
Figure 4-23 on page 88 shows an example of how these settings are configured in
Hyperterminal.
Figure 4-23: Setting COM Port Properties for the Console Connection
5.
Start the terminal connection. You may need to press Enter a few times before you
see the login: prompt.
6.
Log in to the command-line interface with the following default user account and
password:
User admin
Password admin123A!
Starting in software version 4.7, the configuration jump-start automatically starts and
forces a password change.
The system administrator must change the password on the default admin account
through the jump-start script. The default password (admin123A!) is no longer
allowed. Refer to Run the Jump-Start Script on page 89 for more information.
A password must meet the following standards:
• include 8-30 characters
• include at least one numeral
• include at least one upper case letter
• include at least one lower case letter
• include at least one special character (for example, !, @, #, $, %, ^, &, or * –
ASCII 0x21, 0x2F, 0x3A, 0x40, 0x5B, 0x5F, 0x7B, 0x7E)
At the Admin password? prompt in the jump-start script, enter a new password that
meets the standards, then confirm the password.