Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 98 / 142

98 GigaVUE-HC3 Hardware Installation Guide
gsgroup Configures a GigaSMART group consisting of one or more internal GigaSMART ports.
gsop Configures a GigaSMART operation consisting of one or more advanced processing applications.
gsparams Configures GigaSMART parameters.
halt Shuts down the node without powering it off.
hb-profile Configures a heartbeat profile on GigaVUE HC Series nodes.
help Views a description of the interactive help system.
hostname Specifies the node's hostname. The hostname appears in the system prompt and in SNMP traps.
ib-pathway Reserved for future use.
image Manages node software images.
inline-network Configures an inline network on GigaVUE HC Series nodes.
inline-network-group Configures an inline network group on GigaVUE HC Series nodes.
inline-serial Configures an inline tool series on GigaVUE HC Series nodes.
inline-tool Configures an inline tool on GigaVUE HC Series nodes.
inline-tool-group Configures an inline tool group on GigaVUE HC Series nodes.
interface Configures network interfaces.
ip Configures IP settings for the eth0 Mgmt port.
ipv6 Configures IPv6 settings for the eth0 Mgmt port.
job Configures scheduled jobs.
ldap Configures LDAP server settings for authentication.
license Activates features using license keys. Licensing is used for GigaSMART, Port, or Advanced
Features License.
logging Configures event logging.
map Configures maps and map rules to manage GigaVUE traffic distribution.
map-group Configures map groups for GTP whitelisting and GTP flow sampling.
map-passall Creates a pass-all map to send all traffic on a network port to a tool port irrespective of the other
packet distribution in place on the port.
map-scollector Configures shared collector map parameters.
map-template Configures a map template.
nhb-profile Configures a negative heartbeat on GigaVUE HC Series nodes.
no Deletes or clears certain configuration options.
notifications Configures notification settings.
ntp Enables and disables the use of NTP, as well as adds NTP servers.
ntpdate Sets node clock once from a remote server using NTP.
pcap Configures packet capture.
Table 4-2: CLI Commands
Command Description