Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 104 / 142

104 GigaVUE-HC3 Hardware Installation Guide
Connecting to the GigaVUE H Series Node from GigaVUE-FM
After you enable the Web server on the GigaVUE H Series node, it automatically
listens for connections from GigaVUE-FM using either HTTP on port 80 or HTTPS on
port 443. Use the following procedure to connect to a GigaVUE H Series node using
GigaVUE-FM.
N
OTE
:
You can configure whether the GigaVUE H Series node redirects all incoming
HTTP connections to the HTTPS port with the web http redirect command.
1.
Open a supported browser. Refer to the GigaVUE-FM User’s Guide .
2.
Enter one of the following URLs:
https://<GigaVUE Node IP Address>
http://<GigaVUE Node IP Address>
3.
The first time you connect to GigaVUE-FM, your browser will prompt you regarding
an invalid security certificate. Depending on the browser you are using, you can
avoid these warnings either by installing a certificate or adding an exception. The
following table has the details:
N
OTE
:
Gigamon provides the GigaVUE H Series with self-signed certificates for
use with GigaVUE-FM; you can also create and install a third-party certificate on
these nodes.
(config) # show web
Web-based management console enabled: yes
HTTP enabled: yes
HTTP port: 80
HTTP redirect to HTTPS: yes
HTTPS enabled: yes
HTTPS port: 443
Require certificates from DoD CA: no
HTTPS certificate name: default-cert
Listen enabled: yes
No Listen Interfaces.
Inactivity timeout: 15 min
Session autologout: 2 hr 30 min
Session renewal: 30 min
Web client (for file transfers)
Proxy enabled: no
HTTPS server cert verify: yes
HTTPS supplemental CA list: default-ca-list
Browser Add Exception? Install Certificate?
Mozilla Firefox Y Y
Windows Internet Explorer N Y