Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 74 / 142

74 GigaVUE-HC3 Hardware Installation Guide
Removing a Power Supply Module
When removing a power supply module, refer to the following label on the chassis:
Figure 4-3: Power Caution Label
To remove a power supply module:
1.
Power down the power supply module by disconnecting the power inputs.
2.
Wait about 90 seconds for the node to stabilize.
3.
Remove the power supply module.
N
OTE
:
Do not remove a power supply module while inputs are still connected.