Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 131 / 142

B Replacing Control Card 131
The chassis and card configuration is as follows:
(config) # chassis box-id <box ID>
(config) # card slot <slot number>
The GigaStream configuration is as follows:
(config) # port <box ID>/<slot number>/<stack ports> params admin enable
(config) # port <box ID>/<slot number>/<stack ports> type stack
(config) # gigastream alias <GigaStream alias> port-list <box ID>/<slot number>/<stack ports>
7.
On the cluster master node, configure the GigaVUE-HC3. The offline provisioning
includes chassis, card, port, and GigaStream stack port configuration. The chassis
configuration includes the chassis box ID, serial number, and GigaVUE-HC3 with
node type of hc3.
(config) # chassis box-id <box ID> serial-num <serial number> type hc3
(config) # card slot <box ID>/<slot number> product-code <card product code>
(config) # port <box ID>/<slot number>/<stack ports> params admin enable
(config) # port <box ID>/<slot number>/<stack ports> type stack
(config) # gigastream alias <GigaStream alias> port-list <box ID>/<slot number>/<stack ports>
N
OTE
:
Step 6 configures the GigaVUE-HC3 node. Step 7 configures the cluster
master node. The stack ports in Step 7 are the same as those in Step 6 , under
GigaStream configuration.
8.
On the GigaVUE-HC3 node, issue the following command for the node to rejoin the
cluster:
(config) # cluster enable
9.
When the GigaVUE-HC3 node is in the cluster, from the cluster master node apply
the previously saved configuration:
(config) # configuration text fetch <http | https | ftp | tftp | scp | sftp>://<download URL>/<profilename.txt>
apply fail-continue verbose
10.
Verify that the information on the cluster matches the previously saved
configuration for chassis, cards, and traffic using the following CLI commands or
others, depending on your configuration:
(config) # show version
(config) # show cluster global
(config) # show chassis
(config) # show cardss
(config) # show map
(config) # show map stats all