92
GigaVUE-HC3 Hardware Installation Guide
illustrates the
show cards
output for a GigaVUE-HC3 with
properly configured modules.
Figure 4-24: Successful show cards Output
8.
Issue a
show port
command to determine the port numbers that need to be
enabled.
9.
Use the
port
command with the
admin
argument to enable ports on modules. For
example, the following command enables all ports on a PRT-HC3-X24 module:
(config) # port 1/1/x1..x24 params admin enable
10.
Save your changes so that the cards and ports come up automatically at the next
reboot:
(config) # write memory
Command-Line Basics
This section provides a quick orientation to the GigaVUE-OS command-line interface –
how to enter commands, how to get help, and so on.
Command-Line Modes
The GigaVUE-OS can operate in one of three modes, each with its own set of available
commands – Standard, Enable, and Configure. When you first launch the CLI, you start
in Standard mode with access to a limited amount of commands used to review node
status. As you move from
Standard
mode to
Enable
mode to
Configure
mode, both
the power and the number of commands available increase, as summarized in
Differences in Commands for admin and default Level Users
The commands available in the GigaVUE-OS are also different depending on whether
you are logged in as
admin
or
default
level user. Commands listed in bold in
are only available to
admin
level users.
(config) # show cards
Box ID: 1
Slot Config Oper Status HW Type Product Code Serial Num HW Rev PowerReq PowerPriority
---------------------------------------------------------------------------------------------------
cc1 yes up HC3-Main-Board 132-00DR 1DR0-0029 1.0-00 N/A N/A
1 yes up PRT-HC3-C08Q08 132-00DW 1DX0-0001 A1-0 1
2 yes up PRT-HC3-C08Q08 132-00DW 1DX0-0001 A1-0 2
3 yes up SMT-HC3-C05 132-00DX 1DX0-0010 1.0-0 200 3
4 yes up PRT-HC3-X24 132-00DY 1DY0-0029 A1-0 60 4
Summary of Contents for GigaVUE-HC3
