Gigamon GigaVUE-HC3, Hardware Installation Manual

Page: 65 / 142

Assembling the GigaVUE-HC3 Node 65
6.
Remove a filler panel as shown in Figure 3-10 on page 65 .
Figure 3-10: Filler Panel Removal
7.
Keep the filler panels so they can be reinserted if the module is ever removed.
N
OTE
:
To prevent any improper air flow and overheating the node, do not leave any
bays uncovered. It is always recommended to install a filler panel when a module is
removed.
You can install modules in any of the four available front bays on the GigaVUE-HC3.
However, order is important because power management of the modules is based on
the priority of the module, with the module in bay 1 having the highest priority and the
module in bay 4 having the lowest priority. For more information on power
management, refer to
Power Management on page 55 .