background image

 

Documentation Number 232HSPCC1199 Manual

Cover Page

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445

 
 

 

PCMCIA High Speed Serial Card  

CE

 

Model 232HSPCC 

Documentation Number  232HSPCC1199  

 

 

International Headquarters

B&B Electronics Mfg. Co. Inc.

707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350 USA

Phone (815) 433-5100 -- General Fax (815) 433-5105

Home Page: www.bb-elec.com

Sales e-mail:

orders

-- Fax (815) 433-5109

Technical Support e-mail:

[email protected]

-- Fax (815) 433-5104

European Headquarters

B&B Electronics Ltd.

Westlink Commercial Park, Oranmore, Co. Galway, Ireland

Phone (353) 91 792444 -- Fax (353) 91 792445

Home Page: www.bb-europe.com

Sales e-mail:

[email protected]

Technical Support e-mail:

[email protected]

 

February 1999  --  B&B Electronics  

 

November 1995 B&B Electronics RESERVED. No part of this publication may be reproduced or transmitted

in any form or by any means, electronic or mechanical, including photography, recording, or any information
storage and retrieval system without written consent. Information in this manual is subject to change without
notice, and does not represent a commitment on the part of B&B Electronics.

B&B Electronics shall not be liable for incidental or consequential damages resulting from the furnishing,
performance, or use of this manual.

All brand names used in this manual are the registered trademarks of their respective owners. The use of
trademarks or other designations in this publication is for reference purposes only and does not constitute an
endorsement by the trademark holder.

Not Recommended for New Installations. 

Please contact Technical Support for more information.

 

Summary of Contents for PCMCIA High Speed Serial Card CE 232HSPCC















Reviews: