GE Power Management
745 Transformer Management Relay
6-11
6 ACTUAL VALUES
6.3 A2 METERING
6
6.3.10 ANALOG INPUT
The 745 provides the ability to monitor any external quantity via an auxiliary current input called the ANALOG
INPUT.
6.3.11 POWER
The 745 calculates and displays real, reactive, and apparent power as well as the power factor for all of the
available windings providing that the voltage sensing is enabled. Power flowing into the power transformer is
designated as source power and power flowing out of the transformer is designated as load power.
The following Actual Values messages are repeated for Windings 1, 2 and 3.
y
ANALOG INPUT
y
[ENTER] for more
This message indicates the start of the Analog Input actual values. To view
these actual values press
or press
for the end of page A2.
ANALOG INPUT:
0 µA
This message displays the scaled value of the analog input, as defined by
the setpoints noted above. In this message, the name programmed in
S2 SYSTEM SETUP/ANALOG INPUT/ANALOG INPUT NAME
is displayed instead of
ANALOG INPUT
(the factory default), and the units programmed in
S2 SYSTEM SETUP/ANALOG INPUT/ANALOG INPUT UNITS
are displayed instead
of
µA
(which is the factory default).
y
POWER
y
[ENTER] for more
This message indicates the start of the Power actual values. To view these
actual values press
or press
for the end of page A2.
y
W1 POWER
y
[ENTER] for more
This message indicates the start of the Power actual values. To view these
actual values press
or press
for the end of page A2.
W1 REAL POWER:
0 MW
This message displays the total 3 phase real power (in MW) for winding 1(2/
3) as source or load.
W1 REACTIVE POWER:
0 Mvar
This message displays the total 3 phase reactive power (in Mvar) for winding
1(2/3) as source or load.
W1 APPARENT POWER:
0 MVA
This message displays the total 3 phase apparent power (in MVA) for
winding 1(2/3).
W1 POWER FACTOR:
0.00
This message displays the total 3 phase power factor (as lead or lag) for
winding 1(2/3).
E N T E R
M E SSA G E
E N TE R
M E SSA G E
E N T E R
M E SSA G E
Summary of Contents for 745 TRANSFORMER MANAGEMENT RELAY
