Fuji Xerox apeosport-iv C3370, Administrator'S Manual

Page: 541 / 889

Error Code
541
Pr
oblem
Solv
ing
15
003-705 [Cause] Copying is started before the machine exits the Power Saver
mode and detects the change for the tray size, when the paper
size set in the tray that has been changed during the Power
Saver mode.
[Remedy] Cancel copying, and perform the operation for copying again.
003-750 [Cause] Unable to store any documents using the 2 Sided Book Copying
feature.
[Remedy] Check the 2 Sided Book Copying settings.
Reference
z Refer to "3 Copy" > "Layout Adjustment" in the User Guide.
003-751 [Cause] Unable to process the document because the specified scan
area is too small.
[Remedy] Increase the resolution or scan area.
003-752 [Cause] A mix sized document was to be scanned at 600 dpi in Color/2
sided.
[Remedy] Set [Resolution] to [400dpi] or lower, and try scanning again.
003-753 [Cause] A mix sized document was to be scanned at high resolution, 2
sided.
[Remedy] Set [Resolution] to [200dpi], and scan the document again.
003-754
003-755 [Cause] An error occurred in the document feeder.
[Remedy] Execute the job again.
003-756 [Cause] The faxed document is completely blank.
[Remedy] Check whether the document is blank or whether the side of the
document to be faxed is loaded correctly.
003-757 [Cause] A mix sized document was to be scanned at high resolution, 2
sided.
[Remedy] Set [Resolution] to [300dpi] or lower, and scan the document
again.
003-760 [Cause] An incompatible combination of feature is specified for
document scan conditions.
[Remedy] Confirm the selected options.
003-761 [Cause] The paper size of the tray selected for auto tray differs from the
paper size of the tray selected for Auto Paper selection.
[Remedy] Change the paper size for the tray, or change the [Paper Type
Priority] settings.
003-763 [Cause] An error occurred when reading the Calibration Chart.
[Remedy] Place the Calibration Chart correctly on the document glass.
Reference
z Refer to "Executing Calibration" (P.117).
003-780
[Cause] Failed to compress the scanned document.
[Remedy] Reduce the resolution or the ratio for [Reduce/Enlarge] to
decrease the data size, or split the data to send it separately.
Error Code Cause and Remedy