Fuji Xerox apeosport-iv C3370, Administrator'S Manual

Page: 249 / 889

Connectivity & Network Setup
249
T
ools
5
„
Primary Server - Login Password
Enter the login password of the primary server. Up to 31 characters are allowed.
„
Primary Server Type
Select the type of primary server from [Standard] or [Cisco].
„
Secondary Server - IP Address
Enter the IP address of the secondary server. Up to 255 characters are allowed. You can
specify the addresses by IPv4 address, IPv6 address, and FQDN.
„
Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.
The default value is 5060.
„
Secondary Server - Login User Name
Enter the login user name of the secondary server. Up to 31 characters are allowed.
„
Secondary Server - Login Password
Enter the login password of the secondary server. Up to 31 characters are allowed.
„
Secondary Server Type
Select the type of secondary server from [Standard] or [Cisco].
VoIP Gateway Setup
You can configure the following settings for VoIP Gateway 1 to 50.
You can also configure different VoIP gateways by a recipient’s telephone number.
Note
z To use a fixed VoIP gateway, do not register the ID, and specify only the IP address for VoIP Gateway 1.
z You cannot use a VoIP gateway in an IPv6 network.
„
ID
Specify a number to identify the recipients’ telephone numbers.
If you specify "03", this VoIP gateway is used for the telephone numbers beginning with
"03" such as "0312345678" and "0312345679".
Note
z
If you specify a specific telephone number, specify the entire telephone number such as "0312345678".
„
Gateway Address
Enter the IP address of the VoIP gateway.
T.38 Settings
Configure the settings for T.38.
T.38 Transport Protocol
Select T.38 transport protocol from [TCP] and [UDP].
Note
z When you use VoIP gateway manufactured by Cisco Systems, Inc., select [UDP].