Fuji Xerox apeosport-iv C3370, Administrator'S Manual

Page: 433 / 889

Preparations
433
U
sing
th
e Intern
et F
a
x
Service
11
Preparations
This section describes the prerequisites to use the Internet Fax on the machine.
System Requirements for the Machine
z The machine is connected to a network via TCP/IP.
z The environment is prepared for e-mail transmissions.
E-Mail Environment
To use the Internet Fax feature, configure the following settings for your e-mail
environment.
O: Required
U
: Set as required -: Not supported
*1 : When you use the Internet Fax Direct feature, set [Tools] > [System Settings] > [Fax Service Settings] > [Internet Fax Control]
> [Internet Fax Path] to [Direct (P2P)].
*2 : ApeosPort Series models only.
Reference
z To transmit e-mails encrypted by S/MIME or with digital signatures attached, a certificate must be ready in advance. For more
information on a certificate, refer to "Configuration of E-mail Encryption/Digital Signature" (P.457).
Item Description Internet Fax Internet Fax
Direct
*1
via
SMTP
via
POP3
via SMTP
TCP/IP address TCP/IP address of the machine.
TCP/IP protocol is used for e-mail transmissions.
O O O
Subnet mask The subnet mask is required when a network is
divided into subnetworks.
U U U
Gateway address The gateway address is required when multiple
networks are used via gateways.
U U U
The machine's e-
mail address Set the machine's e-mail address.
O O O
DNS server address The address is required when the address of POP3 or
SMTP server is set not using an IP address but a
domain name. The address can be obtained by
DHCP.
U U U
SMTP server address SMTP server is used for sending e-mails from the
machine. The SMTP server can also be used for
receiving e-mails.
O O -
SMTP AUTH login
name, password When a certification-required SMTP server is used,
configure a user name for authentication. Set the
password as necessary.
U U
-
POP3 server Set the POP3 server address. - O -
POP user name Configure the user name for POP receiving. Set the
password as necessary.
- O -
S/MIME settings
*2
Configure S/MIME.
U U U