Epson C8 Series, Manipulator Manual, Page: 41 / 346

Setup & Operation 2. Specifications
C8 Rev.13 27
2.6.2 Option
C8 series have the following options.
For details of options, refer to
Setup& Operation: 6. Options
.
User wires and pneumatic tube
Standard user connector kit : Standard D-sub 15-pin × 2
Waterproof user connector kit : IP67 waterproof D-sub 15-pin × 2
IP67 waterproof for RJ45 × 2
Fittings for customer use : ø6, straight × 2
ø6, elbow × 2
Adjustable mechanical stop
Adjustable mechanical stop : J1
C8/C8L_J2
C8XL_J2
J3
Tool adapter
C8 ISO flange (J6)
Camera plate unit
Camera mounting tool (common for C3 and C4 series)
Brake release box *1
For EU (power supply voltage 200 V, short connector included)
For US/JP(power supply voltage 100 V, short connector included)
Short connector for the brake release box
*1: When using the brake release box with C8 series, it is necessary to connect the
short connector to the M/C power cable or connect the M/C power cable with the
Controller. (The brake release box can be used while the Controller is de-
energized state.)
If you are using C3 or C4 series Manipulator and already have the brake release
box, you can use it by connecting the M/C cable with the Controller, or purchasing
the short connector separately and connecting it to the M/C power cable.