Epson C12 Series, Manipulator Manual

Page: 75 / 314

Setup & Operation 6. Options
C12 Rev.3 61
Width 180 mm
Depth 150 mm
Height 87 mm
Weight (Cables are not included.) 1.7 kg
Cable to the Manipulator 2 m
Power cable length 2 m
Power cable (US) 100 V specification
Power cable (EU) 200 V specification
M/C Short connector For M/C power cable short-circuit
Power cable
Power switch
Brake release switches
Power lamp
A
View from A
Precautions for use
CAUTION
■
If the Manipulator is operated without connecting the brake release unit and the
external short connector, the brakes cannot be released and it may cause damage
on them. After using the brake release unit, be sure to connect the external short
connector to the Manipulator, or check connection of the connector for the brake
release unit.
■
Keep the external short connector.
Otherwise you cannot release the brakes.
■ If you turn ON the brake release unit while the brake release switch is being
pressed, an unintended arm may move downward.
Before turning ON the brake release unit, make sure that the brake release switch
is not pressed.
■ If you turn ON the brake release unit without the connector, it may lead to the short
for the male pin used in the connector.
Before turning ON the brake release unit, make sure that the connector is
connected.