Maintenance 4. Cable Unit
130
C12 Rev.3
42.
Place a mark at a position 250 mm from the cable bracket (C2).
250 mm
43.
For the GS01 cable to be installed on the control board 1, place a
mark at a position 130 mm from the connector.
44.
For the X021, X121, BR021, and CN3 cables, place a mark at a
position 160 mm from the connector respectively.
45.
Use cable brackets (C1) to fix the cables to the Arm #1 cable fixing
plate temporarily (2 positions).
Temporarily fix the silicone tube by aligning its end to the mark.
Hexagon socket head cap bolts: 4-M3
×
6
Rough guide of temporary fixing:
The cables can be pushed up even after fixing the cables.
Summary of Contents for C12 Series
