3. AIAO Units
MN05003006E F or more information visit:
w w w. e a t o n . c o m
1-147
C R # 1 0 0 :
Function: Enable/Disable limit detection. Default =H’0000
Description
bit0=1
Enable CH1 limit detection
bit1=1
Enable CH2 limit detection
bit2=1
Enable CH3 limit detection
bit3=1
Enable CH4 limit detection
bit4 ~ bit15
Reserved
C R # 1 0 1
: Upper and lower limit status. Default =H’0000
Description
bit0=1
CH1 exceeds lower limit
bit1=1
CH2 exceeds lower limit
bit2=1
CH3 exceeds lower limit
bit3=1
CH4 exceeds lower limit
bit4 ~ bit7
Reserved
bit8=1
CH1 exceeds upper limit
bit9=1
CH2 exceeds upper limit
bit10=1
CH3 exceeds upper limit
bit11=1
CH4 exceeds upper limit
bit12 ~ bit15
Reserved
C R # 1 0 2 , 1 0 3 , 1 0 4 , 1 0 5 :
Set the upper limit for CH1 ~ CH4. Default =H’0000
Set the upper limit value for CH1 ~ CH4. Default = K32,000
C R # 1 0 8 , 1 0 9 , 11 0 , 111 :
Set the lower limit value for CH1 ~ CH4. Default =H’0000
Set the lower limit value for CH1 ~ CH4. Default = K-32,000
C R # 1 2 0 , 1 4 0 , 1 6 0 , 1 8 0 :
Set temperature value for PID
1. Set the temperature value (units: 0.1 degree) based on the proper range for each sensor
type, i.e., if the target temperature is 100°C, write K1000 into the specified CR by using
TO instruction.
2. Default = K0.
