3. AIAO Units
MN05003006E F or more information visit:
w w w. e a t o n . c o m
1-99
Configuration parameters affected by CR#40
CR#2 ~ CR#5
Output mode setting of CH1 ~ CH4
CR#28 ~ CR#31
Adjusted Offset value of CH1 ~ CH4
CR#34 ~ CR#37
Adjusted Gain value of CH1 ~ CH4
CR#42
Return to default setting
CR#100
Function: Enable/Disable limit detection
CR#102~CR#105
Set value of CH1~CH4 upper bound
CR#108~CR#111
Set value of CH1~CH4 lower bound
CR#114~CR#117
Output update time of CH1 ~ CH4
CR#118
LV output mode setting
C R # 4 1 :
Save all configuration values, Default =H’0000
Save all the configuration values to the internal flash memory. When saving is completed,
CR#41 will be set to H’FFFF.
Set value
Function
H0 No
action
HFFFF Saving
completed
H5678 Saving
enabled.
Note: Default setting = H0. When the CR#41value = H’5678, saving is enabled. CR#41 will
be set to H’FFFF when the save process is complete. If the value of CR#41 is not H’5678, it
will remain H’0. For example, write K1 into CR#41, and the value will remain H’0.
C R # 4 2 :
Function: Return to default settings. Default =H’0000
Description
bit0
b0=0, no action on CH1; b0=1, set CH1
to default setting
bit1
b1=0, no action on CH2; b1=1, set CH2 to default setting
bit2
b2=0, no action on CH3; b2=1, set CH3 to default setting
bit3
b3=0, no action on CH4; b3=1, set CH4 to default setting
bit4 ~ bit15
Reserved
Note: Set the appropriate bit to 1 and the corresponding channel will return to default settings.
When complete, the value will be reset to 0. If CR#40 is enabled, CR#42 will be invalid when
attempting to reset to defaults, and all configuration values will remain unchanged. Error
Code bit 12 of CR#43 will be set to 1.
Affected Parameters
CR#2 ~ CR#5
Output mode setting of CH1 ~ CH4
CR#28 ~ CR#31
Adjusted Offset value of CH1 ~ CH4
