E L C O p e r a t i o n M a n u a l
F o r m o r e i nf o r m a t i o n v i sit :
w w w. e a t o n . c o m
MN05003006E
4-30
The frequency will not be affected by the MPG electronic gear ratio
C R # 4 4 , 4 5 :
Accumulated number of pulses by MPG
Forward pulses are added and reverse pulses are subtracted. The accumulated
value will not be affected by the settings in CR#40 and CR#41 (electronic gear
ratio).
C R # 4 6 :
Response speed of MPG input
1. The faster the response speed, the more synchronous the pulse output and
MPG pulse input.
2. The slower the response speed, the more likely the pulse output will lag
behind the MPG pulse input
Set value
Response speed
≧
5
4ms (default)
4 32ms
3 108ms
2 256ms
1 or 0
500ms
C R # 4 7 :
Terminal status
bit #
Status
Description
b0
START input
When START input is On, b0 = On.
b1
STOP input
When STOP input is On, b1= On.
b2
DOG input
When DOG input is On, b2 = On.
b3
PG0 input
When PG0 input is On, b3 = On.
b4
LSP input
When LSP input is On, b4 = On.
b5
LSN input
When LSN input is On, b5 = On
b6
A phase input
When A phase input is On, b6 = On.
b7
B phase input
When B phase input is On, b7 = On.
b8
CLR output
When CLR output is On, b8 = On.
b9 ~ b15 Reserved
C R # 4 8 :
Firmware version
The firmware version is displayed in hex, e.g. V1.00 is indicated as H’0100.