Dodge 2015 Journey Owner'S Manual Download Page 96

Page: 96 / 648

“Installing Child Restraints Using the Vehicle Seat

Belt” to check what type of seat belt each seating

position has.

2. Loosen the adjusters on the lower straps and on the

tether strap of the child seat so that you can more

easily attach the hooks or connectors to the vehicle

anchorages.

3. Place the child seat between the lower anchorages for

that seating position. For some second row seats, you

may need to recline the seat and/or raise the head

restraint to get a better fit. If the rear seat can be moved

forward and rearward in the vehicle, you may wish to

move it to its rear-most position to make room for the

child seat. You may also move the front seat forward

to allow more room for the child seat.

4. Attach the lower hooks or connectors of the child

restraint to the lower anchorages in the selected seat-

ing position.

5. If the child restraint has a tether strap, connect it to the

top tether anchorage. See the section “Installing Child

Restraints Using the Top Tether Anchorage” for direc-

tions to attach a tether anchor.

6. Tighten all of the straps as you push the child restraint

rearward and downward into the seat. Remove slack

in the straps according to the child restraint manufac-

turer’s instructions.

7. Test that the child restraint is installed tightly by

pulling back and forth on the child seat at the belt

path. It should not move more than 1 inch (25.4 mm)

in any direction.

How To Stow An Unused ALR Seatbelt:

When using the LATCH attaching system to install a

child restraint, stow all ALR seat belts that are not being

used by other occupants or being used to secure child

restraints. An unused belt could injure a child if they play

94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands