Dodge 2015 Journey Owner'S Manual Download Page 394

Page: 394 / 648

•

Floor Mode

Air comes from the floor outlets. A slight

amount of air is directed through the defrost

and side window demister outlets.

•

Mix Mode

Air comes from the floor, defrost and side

window demist outlets. This mode works best

in cold or snowy conditions.

13. Climate Control OFF Button

Press and release this button to turn the Climate Control

ON/OFF.

14. Driver

Temperature

Control

Down

Button

(Uconnect® 8.4)

Provides the driver with independent temperature con-

trol. Push the button for cooler temperature settings.

NOTE:

In Sync mode, this button will also automatically

adjust the passenger temperature setting at the same

time.

15. Driver Temperature Control Up Button (Uconnect® 8.4)

Provides the driver with independent temperature con-

trol. Push the button for warmer temperature settings.

NOTE:

In Sync mode, this button will also automatically

adjust the passenger temperature setting at the same

time.

16. Temperature Control (Uconnect® 4.3)

Press the driver or passenger temperature button on the

touchscreen to regulate the temperature of the air inside

the passenger compartment. Moving the temperature bar

into the red area, indicates warmer temperatures. Mov-

ing the temperature bar into the blue area indicates cooler

temperatures. Driver and passenger have independent

temperature control if Sync mode is not illuminated.

392 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands