Dodge 2015 Journey Owner'S Manual Download Page 36

Page: 36 / 648

To Disengage The Child-Protection Door Lock System

1. Open the rear door.
2. Insert the tip of the emergency key (or alike) into the

child lock control and rotate it to the UNLOCK

position.

3. Repeat steps 1 and 2 for the opposite rear door.

NOTE:

After disengaging the Child-Protection Door

Lock system, always test the door from the inside to

make certain it is in the desired position.

KEYLESS ENTER-N-GO™

The Passive Entry system is an enhancement to the

vehicle’s Remote Keyless Entry (RKE) system and a

feature of Keyless Enter-N-Go™. This feature allows you

to lock and unlock the vehicle’s door(s) without having to

push the RKE transmitter lock or unlock buttons.

NOTE:

•

Passive Entry may be programmed ON/OFF; refer to

“Uconnect® Settings” in “Understanding Your Instru-

ment Panel” for further information.

Child-Protection Door Lock Function

34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands