Dodge 2015 Journey Owner'S Manual Download Page 478

Page: 478 / 648

Pressure Monitoring Telltale Light” will turn off, as

long as no tire pressure is below the low-pressure

warning limit in any of the four active road tires. The

vehicle may need to be driven for up to 20 minutes

above 15 mph (24 km/h) in order for the TPMS to

receive this information.

Premium System — If Equipped

The Tire Pressure Monitor System (TPMS) uses wireless

technology with wheel rim mounted electronic sensors to

monitor tire pressure levels. Sensors, mounted to each

wheel as part of the valve stem, transmit tire pressure

readings to the receiver module.

NOTE:

It is particularly important for you to check the

tire pressure in all of the tires on your vehicle monthly

and to maintain the proper pressure.

The TPMS consists of the following components:

•

Receiver module

•

Four Tire Pressure Monitoring Sensors

Tire Pressure Monitor Display

476 STARTING AND OPERATING

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands