Dodge 2015 Journey Owner'S Manual Download Page 315

Page: 315 / 648

EVIC Red Indicators

This area will show reconfigurable red telltales. These

telltales include:

•

Door Ajar

This light will turn on to indicate that one or

more doors may be ajar.

NOTE:

If the vehicle is moving there will also be a single

chime.

•

Liftgate Ajar

This indicator will turn when the liftgate is ajar.

NOTE:

If the vehicle is moving there will also be a single

chime.

•

Oil Pressure Warning Light

This light indicates low engine oil pressure. If the

light turns on while driving, stop the vehicle and shut off

the engine as soon as possible. A chime will sound for

four minutes when this light turns on.
Do not operate the vehicle until the cause is corrected.

This light does not show how much oil is in the engine.

The engine oil level must be checked under the hood.

•

Charging System Light

This light shows the status of the electrical charg-

ing system. The light should come on when the

ignition switch is first turned ON/RUN and remain on

briefly as a bulb check. If the light stays on or comes on

while driving, turn off some of the vehicle’s non-essential

electrical devices or increase engine speed (if at idle). If

the charging system light remains on, it means that the

UNDERSTANDING YOUR INSTRUMENT PANEL 313

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands