Dodge 2015 Journey Owner'S Manual Download Page 237

Page: 237 / 648

HEATED STEERING WHEEL — IF EQUIPPED

The steering wheel contains a heating element that helps

warm your hands in cold weather. The heated steering

wheel has only one temperature setting. Once the heated

steering wheel has been turned on it will operate for up

to 80 minutes before automatically shutting off. The

heated steering wheel can shut off early or may not turn

on when the steering wheel is already warm.
The heated steering wheel control button is located

within the Uconnect® system. You can gain access to the

control button through the climate screen or the controls

screen.

•

Press the heated steering wheel button

once to

turn the heating element ON.

•

Press the heated steering wheel button

a second

time to turn the heating element OFF.

NOTE:

The engine must be running for the heated

steering wheel to operate.

Vehicles Equipped With Remote Start

On models that are equipped with remote start, the

heated steering wheel can be programmed to come on

during a remote start through the Uconnect® system.

Refer to “Uconnect® Settings” in “Understanding Your

Instrument Panel” for further information.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands