Dodge 2015 Journey Owner'S Manual Download Page 33

Page: 33 / 648

The doors can also be locked and unlocked with the

Keyless Enter-N-Go™ (Passive Entry) system. For further

information, refer to “Keyless Enter-N-Go™” in “Things

To Know Before Starting Your Vehicle”.
If you push the power door lock switch, with the ignition

in the ON/RUN or ACC position and any front door is

open, the power locks will not operate. This prevents you

from accidentally locking the Key Fob in the vehicle.

Turning off the ignition or closing the door will allow the

locks to operate. If a door is open, and the ignition is in

the ON/RUN or ACC position, a chime will sound as a

reminder to remove the Key Fob.

Automatic Door Locks — If Equipped

The auto door lock feature default condition is enabled.

When enabled, the door locks will lock automatically

when the vehicle’s speed exceeds 15 mph (24 km/h). The

auto door lock feature can be enabled or disabled by your

authorized dealer or through the Uconnect® Settings in

your radio.

Auto Unlock On Exit

The doors will unlock automatically on vehicles with

power door locks if:
1. The Automatic Unlock Doors On Exit feature is en-

abled.

2. The transmission was in gear and the vehicle speed

returned to 0 mph (0 km/h).

3. The transmission is in PARK.
4. Any vehicle door is opened.
5. The doors were not previously unlocked.
6. The vehicle speed is 0 mph (0 km/h).

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands