Dodge 2015 Journey Owner'S Manual Download Page 187

Page: 187 / 648

The system will best recognize your speech if the win-

dows are closed, and the heater/air conditioning fan is

set to low.
At any point, if the system does not recognize one of your

commands, you will be prompted to repeat it.
To hear available commands, push the Uconnect® Voice

Command

button and say “Help.” You will hear

available commands for the screen displayed.

Natural Speech

Natural speech allows the user to speak commands in

phrases or complete sentences. The system filters out

certain non-word utterances and sounds such as “ah”

and “eh.” The system handles fill-in words such as “I

would like to.”

The system handles multiple inputs in the same phrase

or sentence such as “make a phone call” and “to Kelly

Smith.” For multiple inputs in the same phrase or sen-

tence, the system identifies the topic or context and

provides the associated follow-up prompt such as “Who

do you want to call?” in the case where a phone call was

requested but the specific name was not recognized.
The system utilizes continuous dialog; when the system

requires more information from the user it will ask a

question to which the user can respond without pressing

the Uconnect® Voice Command

button.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands