Dodge 2015 Journey Owner'S Manual Download Page 274

Page: 274 / 648

may have to be reset manually. To reset the inverter

manually press the power inverter button OFF and ON.

To avoid overloading the circuit, check the power ratings

on electrical devices prior to using the inverter.

NOTE:

Due to built-in overload protection, the power

outlet will shut down if the 115 Volt AC (150 Watt

maximum) power rating is exceeded.

WARNING!

To avoid serious injury or death:

•

Do not use a three-prong adaptor.

•

Do not insert any objects into the receptacles.

•

Do not touch with wet hands.

•

Close the lid when not in use.

•

If this outlet is mishandled, it may cause an electric
shock and failure.

Power Inverter Operation

The power inverter is turned on and off using the

Uconnect® System.

Vehicles Equipped With Uconnect® 4.3

To turn the power inverter on or off perform the following:
1. Press the “More” button on the faceplate (located next

to the Uconnect® display).

2. Press the “Outlet” button on the touchscreen (located

on the Uconnect® display) to turn the power inverter

On or Off.

Vehicles Equipped With Uconnect® 8.4 And 8.4 Nav

To enable or disable the power inverter perform the

following:
1. Press the “Controls” button on the touchscreen.
2. Press the “Outlet” button on the touchscreen to turn

the power inverter On or Off.

272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands