Dodge 2015 Journey Owner'S Manual Download Page 476

Page: 476 / 648

monitor tire pressure levels. Sensors, mounted to each

wheel as part of the valve stem, transmit tire pressure

readings to the receiver module.

NOTE:

It is particularly important for you to check the

tire pressure in all of the tires on your vehicle monthly

and to maintain the proper pressure.
The TPMS consists of the following components:

•

Receiver Module

•

Four Tire Pressure Monitoring Sensors

•

Tire Pressure Monitoring Telltale Light

Tire Pressure Monitoring Low Pressure Warnings

The “Tire Pressure Monitoring Telltale Light” will

illuminate in the instrument cluster, a “LOW

TIRE” message will be displayed and a chime will sound

when tire pressure is low in one or more of the four active

road tires. An

Inflate to XX

message will also be

displayed. Should this occur, you should stop as soon as

possible, check the inflation pressure of each tire on your

vehicle, and inflate each tire to the vehicle’s recom-

mended cold placard pressure value, as shown in the

Inflate to XX

message. Once the system receives the

updated tire pressures, the system will automatically

update and the “Tire Pressure Monitoring Telltale Light”

and “LOW TIRE” message will turn off. The vehicle may

need to be driven for up to 20 minutes above 15 mph

(24 km/h) in order for the TPMS to receive this

information.

Service TPMS Warning

When a system fault is detected, the “Tire Pressure

Monitoring Telltale Light” will flash on and off for 75

seconds and then remain on solid. The system fault will

also sound a chime. If the ignition switch is cycled, this

sequence will repeat, providing the system fault still

474 STARTING AND OPERATING

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands