Dodge 2015 Journey Owner'S Manual Download Page 348

Page: 348 / 648

point on the scale between the “+” and “–” buttons on the

touchscreen. Then press the back arrow button on the

touchscreen.

NOTE:

Bass/Mid/Treble allow you to simply slide your

finger up or down to change the setting as well as press

directly on the desired setting.

•

Speed Adjusted Volume

This feature increases or decreases volume relative to

vehicle speed. To change the Speed Adjusted Volume

press the “Off,” “1,” “2” or “3” button on the touchscreen.

Then press the back arrow button on the touchscreen.

•

Music Info Cleanup

This feature helps organize music files for optimized

music navigation. To make your selection, press the

“Music Info Cleanup” button on the touchscreen, select

“On” or “Off” followed by pressing the back arrow

button on the touchscreen.

Phone/Bluetooth®

After pressing the “Phone/Bluetooth®” button on the

touchscreen the following settings will be available.

•

Paired Devices

This feature shows which phones are paired to the

Phone/Bluetooth® system. For further information, refer

to the Uconnect® Supplement.

SiriusXM Setup

After pressing the “SIRIUS Setup” button on the touch-

screen the following settings will be available.

•

Channel Skip

SiriusXM can be programmed to designate a group of

channels that are the most desirable to listen to or to

exclude undesirable channels while scanning. To make

your selection, press the “Channel Skip” button on the

346 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands