Dodge 2015 Journey Owner'S Manual Download Page 338

Page: 338 / 648

Cluster” button on the touchscreen, until a check-mark

appears next to the setting, showing that setting has been

selected. Press the back arrow button on the touchscreen

to return to the previous menu.

•

Fuel Saver Display In Cluster — If Equipped

The “ECO” message is located in the instrument cluster

display, this message can be turned on or off. To make

your selection, press the “Fuel Saver Display” button on

the touchscreen, until a check-mark appears next to the

setting, showing that setting has been selected. Press the

back arrow button on the touchscreen to return to the

previous menu.

Clock

After pressing the Clock button on the touchscreen the

following settings will be available.

•

Sync With GPS Time — If Equipped

When in this display, you may automatically have the

radio set the time. To change the Sync with GPS Time

setting press the “Sync with GPS Time” button on the

touchscreen until a check-mark appears next to the

setting, indicating that the setting has been selected. Press

the back arrow button on the touchscreen to return to the

previous menu.

•

Set Time Hours

When in this display, you may adjust the hours. The

“Sync with GPS Time” button on the touchscreen must be

unchecked. To make your selection press the “+” or “–”

buttons on the touchscreen to adjust the hours up or

down. Press the back arrow button on the touchscreen to

return to the previous menu or press the “X” button on

the touchscreen to close out of the settings screen.

336 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands