Dodge 2015 Journey Owner'S Manual Download Page 121

Page: 121 / 648

Resetting the Power Folding Outside Mirrors

You may need to reset the power folding mirrors if the

following occurs:

•

The mirrors are accidentally blocked while folding.

•

The mirrors are accidentally manually folded/

unfolded.

•

The mirrors come out of the unfolded position.

•

The mirrors shake and vibrate at normal driving

speeds.

To reset the power folding mirrors: Fold and unfold them

by pressing the button. (This may require multiple button

pushes). This resets them to their normal position.

Manual Folding Mirrors — If Equipped

Some models have exterior mirrors that are hinged. The

hinge allows the mirror to pivot forward and rearward to

resist damage. The hinge has three detent positions:

forward, rearward and normal.

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This

feature can be activated whenever you turn on the

rear window defroster (if equipped). Refer to “Rear

Window Features” in “Understanding The Features Of

Your Vehicle” for further information.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands