Dodge 2015 Journey Owner'S Manual Download Page 45

Page: 45 / 648

For further information on Keyless Enter-N-Go™ (Pas-

sive Entry), refer to “Keyless Enter-N-Go™” in “Things

To Know Before Starting Your Vehicle”.

NOTE:

The liftgate cannot be unlocked or locked with

the manual door lock plungers on the door trim panels or

the door lock cylinder on the driver’s door.
To open the unlocked liftgate, squeeze the handle and

pull the liftgate toward you. Gas props will raise and

support the liftgate in the open position.

NOTE:

•

In the event of a power malfunction to the liftgate, an

emergency liftgate latch release can be used to open

the liftgate. The emergency liftgate latch release can be

accessed through a snap-in cover located on the lift-

gate trim panel.

•

If liftgate is left open for an extended period of time,

the liftgate may need to be closed manually to reset

power liftgate functionality.

Liftgate Release

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands