Dodge 2015 Journey Owner'S Manual Download Page 493

Page: 493 / 648

properly. The MIL in the instrument cluster may turn

on if the gas cap is not secured properly. Make sure

that the gas cap is tightened each time the vehicle is

refueled.

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel

filler cap is loose, improperly installed, or damaged, the

word “gASCAP” will display in the odometer. If this

occurs, tighten the fuel filler cap until a “clicking” sound

is heard and press the TRIP ODOMETER button to turn

off the message. If the problem persists, the message will

appear the next time the vehicle is started.
A loose, improperly installed, or damaged fuel filler cap

may also turn on the MIL. Refer to “Onboard Diagnostic

System” in “Maintaining Your Vehicle” for further infor-

mation.

VEHICLE LOADING

The load carrying capacity of your vehicle is shown on

the “Vehicle Certification Label”. This information

should be used for passenger and luggage loading as

indicated.
Do not exceed the specified Gross Vehicle Weight Rating

(GVWR) or the Gross Axle Weight Rating (GAWR).

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to

the drivers side B-Pillar or the rear of the driver’s door.
The label contains the following information:

•

Name of manufacturer

•

Month and year of manufacture

•

Gross Vehicle Weight Rating (GVWR)

•

Gross Axle Weight Rating (GAWR) front

STARTING AND OPERATING 491

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands