Dodge 2015 Journey Owner'S Manual Download Page 520

Page: 520 / 648

3. Pull the spare tire out from underneath the vehicle and

raise it upright so the tire’s tread is on the ground.

4. Tilt the retainer at the end of the winch cable and

remove it from the center of the wheel.

Spare Tire Stowage

NOTE:

Refer to “Spare Tire Removal” for information on

assembling the winch tools.
1. Place the spare tire near to the winch cable. Hold the

spare upright so that the tire’s tread is on the ground

and the valve stem is at the top of the wheel facing

away from the rear of the vehicle.

2. Tilt the retainer at the end of the winch cable and drop

it through the center of the wheel. Then place the spare

tire with the cable and retainer underneath the vehicle.

3. Fit the assembled jack-handle over the winch drive

nut. Rotate the jack-handle assembly clockwise to

raise the spare tire into the storage area. Continue to

rotate the jack-handle assembly until you hear the

winch mechanism click three times. It cannot be over

tightened. Push against the tire several times to be

sure it is held securely in place.

Spare Tire Retainer

518 WHAT TO DO IN EMERGENCIES

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands