Dodge 2015 Journey Owner'S Manual Download Page 460

Page: 460 / 648

WARNING!

(Continued)

•

Unequal tire pressures from one side of the vehicle
to the other can cause the vehicle to drift to the
right or left.

•

Always drive with each tire inflated to the recom-
mended cold tire inflation pressure.

Both under-inflation and over-inflation affect the stability

of the vehicle and can produce a feeling of sluggish

response or over responsiveness in the steering.

NOTE:

•

Unequal tire pressures from side to side may cause

erratic and unpredictable steering response.

•

Unequal tire pressure from side to side may cause the

vehicle to drift left or right.

Economy

Under-inflated tires will increase tire rolling resistance

resulting in higher fuel consumption.

Ride Comfort And Vehicle Stability

Proper tire inflation contributes to a comfortable ride.

Over-inflation produces a jarring and uncomfortable

ride.

Tire Inflation Pressures

The proper cold tire inflation pressure is listed on the

driver’s side B-Pillar or rear edge of the driver’s side

door.
At least once a month:

•

Check and adjust tire pressure with a good quality

pocket-type pressure gauge. Do not make a visual

458 STARTING AND OPERATING

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands