Dodge 2015 Journey Owner'S Manual Download Page 153

Page: 153 / 648

Help Command

If you need assistance at any prompt, or if you want to

know your options at any prompt, say “Help” following

the beep.
To activate the Uconnect® Phone from idle, simply push

the

button on your steering wheel and say a

command or say “help.” All Uconnect® Phone ses-

sions begin with a push of the

button on the radio

control head.

Cancel Command

At any prompt, after the beep, you can say “Cancel” and

you will be returned to the main menu.
You can also push the

button on your

steering wheel when the system is listening for a

command and be returned to the main or previous

menu.

Pair (Link) Uconnect® Phone To A Mobile Phone

To begin using your Uconnect® Phone, you must pair

your compatible Bluetooth® enabled mobile phone.

NOTE:

•

You must have Bluetooth® enabled on your mobile

phone to complete this procedure.

•

The vehicle must be in PARK.

To complete the pairing process, you will need to refer-

ence your mobile phone Owner’s Manual. The

Uconnect® website may also provide detailed instruc-

tions for pairing.
1. Press the “Phone” button on the touchscreen to begin.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands