Dodge 2015 Journey Owner'S Manual Download Page 495

Page: 495 / 648

Figure out the weight on the front and rear of the vehicle

separately. It is important that you distribute the load

evenly over the front and rear axles.
Overloading can cause potential safety hazards and

shorten useful service life. Heavier axles or suspension

components do not necessarily increase the vehicle’s

GVWR.

Loading

To load your vehicle properly, first figure out its empty

weight, axle-by-axle and side-by-side. Store heavier items

down low and be sure you distribute their weight as

evenly as possible. Stow all loose items securely before

driving. If weighing the loaded vehicle shows that you

have exceeded either GAWR, but the total load is within

the specified GVWR, you must redistribute the weight.

Improper weight distribution can have an adverse effect

on the way your vehicle steers and handles and the way

the brakes operate.

TRAILER TOWING

In this section you will find safety tips and information

on limits to the type of towing you can reasonably do

with your vehicle. Before towing a trailer, carefully

review this information to tow your load as efficiently

and safely as possible.
To maintain the New Vehicle Limited Warranty coverage,

follow the requirements and recommendations in this

manual concerning vehicles used for trailer towing.

Common Towing Definitions

The following trailer towing related definitions will assist

you in understanding the following information:

Gross Vehicle Weight Rating (GVWR)

The GVWR is the total allowable weight of your vehicle.

This includes driver, passengers, cargo and tongue

weight. The total load must be limited so that you do not

STARTING AND OPERATING 493

Summary of Contents for 2015 Journey









































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands

Dodge 2015 Journey, Owner'S Manual

Search results

Summary of Contents for 2015 Journey

Reviews:

Related manuals for 2015 Journey

Brands by name

Popular brands